Questions and Answers about the new Haltech uC-10

The team at Goleby's Parts with the help of Haltech have put together a Key Features & FAQ about the new Haltech uC-10 Digital Display. If there are any other questions you had regarding the dash, please leave a comment below and we will try and update with the answer. 

Click here to buy the Haltech - uC-10 Digital Display Dash 

Key Features:

Crystal Clear Screen: the uC-10 is fitted with a full-color, optically bonded TFT screen featuring a 70° minimum viewing angle (vertical and horizontal) screen specs are: 1280 x 480 resolution, 600+ lumens. Refresh rate: 60Hz

Compatibility: The uC-10 is compatible with Haltech CAN, OBD2, and selected aftermarket ECU brands. It can also be wired in as a complete stand-alone unit. This versatility ensures that it can seamlessly integrate into a wide range of vehicles and setups. It is also IP64 rated (Dust-tight and protected against water splashes)  and equipped with a 6-digit odometer.

Expansion:The uC-10 offers plenty of scope for sensors and other inputs in a stand-alone configuration or for use as an I/O expander in a Haltech environment.

• User Definable I/O: 10 x AVIs, 4 x DPOs, 4 x SPIs.
• Fixed I/O: 1 x Tacho Input and 1 x Alternator Excite.

On-Board Data Logging: The uC-10 comes equipped with 512MB of on-board looped data logging.

NSP compatible: The uC-10 will be compatible with our free NSP software, straight out of the box.

Odometer: 6 Digits

IP Rating: IP64 (Dust-tight and protected against water splashes)

Frequently Asked Questions:

Does the uC-10 have shift lights?

No shift lights

Is the uC-10 touchscreen?

No, there is aux ports for buttons to swap screens. 

Can you plug the uC-10 directly to OBD2?

Yes, OBD2 is used for connection along with CAN of selected ECUs

What ECU's support the uC-10?

Haltech, Link, MaxxECU, Microtech, MoTec M1 Series, MoTec hundres series (M400,600,800 gold box ECUs), Syvecs. 

What do the buttons do that come with the uC-10?

The uC-10 Display Dash comes supplied with two push buttons that you can install in a convenient location in your vehicle. These buttons can be connected to the uC-10 main connector so that Button 1 cycles through the multiple screen display options on the uC-10 display dash, and Button 2 cancels alarms. Alternatively, you can use both buttons for screen scrolling, with one button advancing to the next screen and the other returning to the previous screen.

Will the uC-10 Display be fully customisable or will it have pre-set layouts? 

There will be pre-set layouts but not customisable layouts at the time of release. Through the new dash section in our NSP software, you’re able to change channels and choose your colour settings on our default pre-set screens.

Does the uC-10 have a reverse camera/rear view input?

No it does not. 

I see it comes with a Wi-Fi antenna in the box, does that mean it is Wi-Fi compatible?

Not yet. The uC-10 does have a Wi-Fi module in it which will become available in a future firmware update, so don’t lose your Wi-Fi antenna!

It logs data, so can the uC-10 do lap timing?

No, not at the time of release.