Products

1/4" Open Tip Thermocouple only - (0.95m) 37-1/2" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple a...

1/4" Open Tip Thermocouple only - (1.07m) 42" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple ampli...

1/4" Open Tip Thermocouple only - (1.30m) 51" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple ampli...

1/4" Open Tip Thermocouple only - (1.52m) 60" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple ampli...

1/4" Open Tip Thermocouple only - (1.75m) 69" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple ampli...

1/4" Open Tip Thermocouple only - (1.87m) 73-1/2" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple a...

1/4" Open Tip Thermocouple only - (2.32m) 91-1/2" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple a...

1/4" Open Tip Thermocouple only - (2.44m) 96" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple ampli...

1/4" Stainless Steel Weld-on Base Only

Please take care when wiring this sensor as incorrect wiring will damage this sensor! All Honeywell Pressure sensors are individually electronicall...

Please take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " MAP and Pressure sensors are individually electroni...

Please take care when wiring this sensor as incorrect wiring will damage this sensor! All Motorsport MAP and Pressure sensors are individually elec...

Description: HT-010134 3 Bar Motorsport MAP Sensor Other Information: 3 Bar Motorsport MAP Sensor(includes HT-031001 - Male Deutsch DTM 3 Connector)

Please take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " MAP and Pressure sensors are individually electroni...

Length: 1200mm / 47.2" Suits: Selected Haltech Terminated Engine Harnesses Includes: 1 x HT-130348 - 6 Channel Ignition Extension Harness

Please take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " MAP and Pressure sensors are individually electroni...

Adaptor - Brass 1/8"NPTF to 3/8"NPTF Suits: 1/8" NPT Sensors Includes: Adaptor Only Notes: Tightening Torque: 1.5 - 3 TPFT (Turns past finger tight)

Used to mount linear position sensors to the chassis of a vehicle Suits: 1/2"-20 Threaded Bolts Includes: 2 x Mounting nuts , 2 x #8-32 / 2 x #10-3...

Analogue Output Adaptor Outputs: Converts a PWM signal from an ECU output to a 0-5V analogue voltage signal Suits: e.g. TPS output to an AWD contro...

Bosch 4000 PSI Fluid Pressure and Temperature Sensor Includes: Includes: Matching plug, pins and seals Notes: Used to measure fluid pressure and te...

Thread: 1/8 NPT CO2 Boost Control Dual Solenoid & Pressure Sensor Kit Includes: Two 3 port 33Hz boost control solenoid kits, 150 PSI "TI" waste...

Coolant Temp Sensor - Large Thread 3/8 NPT 18TPI Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Suits: Suits DT Series Solid Contacts and Cable sizes 0.5mm2 to 1.5mm2 Includes: 1 x DT Crimping Tool Notes: Use with Solid Barrel Contacts

Dual Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins.