Products

Adaptor - Brass 1/8"NPTF to 3/8"NPTF Suits: 1/8" NPT Sensors Includes: Adaptor Only Notes: Tightening Torque: 1.5 - 3 TPFT (Turns past finger tight)

Air Temp Sensor - 1/4 NPT Thread - Suits Nissan Z32 300ZX Suits: Nissan Z32 300ZX intake. Includes: Matching Delphi plug and pins. Notes: 127 deg C...

Used to mount linear position sensors to the chassis of a vehicle Suits: 1/2"-20 Threaded Bolts Includes: 2 x Mounting nuts , 2 x #8-32 / 2 x #10-3...

Analogue Output Adaptor Outputs: Converts a PWM signal from an ECU output to a 0-5V analogue voltage signal Suits: e.g. TPS output to an AWD contro...

Boost Control Solenoid 4 Port, Used to control a wider range of boost pressure Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb ...

Bosch 4000 PSI Fluid Pressure and Temperature Sensor Includes: Includes: Matching plug, pins and seals Notes: Used to measure fluid pressure and te...

Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor Harness Notes: CAN Cable - DT-4 to DTM-4 Adaptor- Suits CAN Keypad - 200mm

Suits: Haltech CAN Keypads Includes: 5 Label Sheet (140 individual labels) Notes: A selection of pre designed, semi transparent labels to suit the ...

Thread: 1/8 NPT CO2 Boost Control Dual Solenoid & Pressure Sensor Kit Includes: Two 3 port 33Hz boost control solenoid kits, 150 PSI "TI" waste...

Coolant Temp Sensor - Large Thread 3/8 NPT 18TPI Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Suits: Suits DT Series Solid Contacts and Cable sizes 0.5mm2 to 1.5mm2 Includes: 1 x DT Crimping Tool Notes: Use with Solid Barrel Contacts

Suits: DTM Series Solid Contacts and Cable sizes 0.515mm2 to 0.81mm2 Includes: 1 x DTM Crimper Notes: Use with Solid Barrel Contacts

Suits: DTP Series Solid Contacts and Cable sizes 2.05mm2 to 3.3mm2 Includes: 1 x DTP Crimping Tool Notes: Use with Solid Barrel Contacts

Dual Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins.

Haltech Dual Crimper Set Inc 3 pin removal tools Includes: 2 x Open Barrel Crimper tools 3 x Removal tools CRIMPER AND PIN TOOL SET They say crimpi...

12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Dual Switch Panel Only - includes Yellow knob Other Information: Control your Elite function...

Haltech - Elite 1000-2500 Mazda RX7 FD3S-S6 Plug 'n' Play Adaptor Harness Suits: If you are using a factory harness and are after an easy ECU upgr...

If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly...

If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly...

If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly...

Suits: Mazda 13B engine found in the RX-7 Series 6 - Series 8. The fastest and most cost effective way to wire your race car or engine conversion! ...

If you are using a factory harness and are after an easy ECU upgrade - this is a product for you. These adaptors plug directly into your Haltech EC...

If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly...

This adaptor plugs directly into your Haltech Elite ECU and has a set of factory connectors on the other side which plug straight into the factory ...