CAN Communication

3 Bar GM MAP Sensor Includes: Matching plug and 3 pins.

Please take care when wiring this sensor as incorrect wiring will damage this sensor! All Motorsport MAP and Pressure sensors are individually elec...

1/4" Mild Steel Weld-on Kit - inc Nut and Ferrule Includes: Nut and Ferrule Notes: Compression ferrules are single use and must be replaced when re...

PD16 PDM + Plug and Pin Set Superseal connector 34 Pin (Key 1) Plug and Pins Plug and pins only - Male Deutsch DTP-06-4S - Black connector (25Amp...

Haltech - Throttle Position Sensor - Contactless Dual Channel 8mm D-shaft - Drive by Wire compatible Length: 500mm cable length Suits: CW & CCW...

PD16 PDM The NEXUS PD16 is Haltech's new power distribution product. Boasting new, innovative yet user-friendly technology, it sets a new market st...

Plug and Pins Only 24 Pin TYCO As supplied this product is direct Plug 'n' Play compatible with an Elite ECU CAN port, Elite ECU Harness CAN connec...

Haltech Driveshaft Split Collar 1.812" / 46mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 1.812" I.D. 8 Magnet 1 x 5/32 Allen Key Notes: 8 ...

1/4" Open Tip Thermocouple only - (1.07m) 42" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple ampli...

Length: 1.2M (4ft) 1200mm extension cable for Haltech CAN Wideband Controller - Suits LUS4.9

1/4" Open Tip Thermocouple only - (0.95m) 37-1/2" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple a...

1/4" Open Tip Thermocouple only - (0.84m) 33" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple ampli...

1/4" Open Tip Thermocouple only - (1.98m) 78" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple ampli...

1/4" Open Tip Thermocouple only - (0.61m) 24" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple ampli...

1/4" Open Tip Thermocouple only - (0.72m) 28-1/2" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple a...

IO 12 Expander Box - 2.5m/8ft Flying Lead Harness Only CAN ID - Box A or B

1/4" Open Tip Thermocouple only - (1.52m) 60" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple ampli...

TMS-4 OVERVIEW The Haltech TMS-4 is a plug and play tyre pressure monitoring system, controlled through your Haltech Elite or Nexus ECU. Typica...

As supplied this product is direct Plug 'n' Play compatible with an Elite ECU CAN port, Elite ECU Harness CAN connector or mutiple CAN device insta...

Please take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " MAP and Pressure sensors are individually electroni...

1/4" Open Tip Thermocouple only - (1.30m) 51" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple ampli...

1/4" Open Tip Thermocouple only - (2.21m) 87" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple ampli...

1/4" Open Tip Thermocouple only - (2.10m) 82-1/2" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple a...

PD16 Flying Lead Harness - 5M Suits: Nexus PD16. Includes: Wire in Harness, 5 meters (16ft) in Length - Suits Nexus PD16. TXL Wire. Main Connector...