CAN Communication

CAN Adaptor Cable Haltech CAN Ada Cable DTM-4 F to 8 pin Black Tyco 75mm (3"). Suits: Used to adapt a Platinum series ECU to Elite DTM-4 CAN system.

Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector.  Plugs directly into the CAN socket on the ECU PCB. 12V an...

Haltech - Knock Sensor - Genuine Bosch Suits: 8mm (5/16") mounting bolt. Includes: Matching plug and 2 pins.

Haltech - PD16 PDM + Flying Lead Harness (5M) The NEXUS PD16 is Haltech's new power distribution product. Boasting new, innovative yet user-friendl...

Haltech - 1/4" Nut and Brass Ferrule Only Notes: Compression ferrules are single use and must be replaced when replacing probes.

Haltech - Air Temp Sensor Thread: 1/4 NPT Air Temp Sensor - 1/4 NPT Thread - Suits Nissan Z32 300ZX Suits: Nissan Z32 300ZX intake. Includes: Match...

Haltech - Air Temp Sensor - Thread: 3/8 NPT 18TPI Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Haltech - Elite CAN Cable DTM-4 to 8 Pin Black Tyco With this powerful cable, you'll have access to advanced features and increased performance for...

Haltech - TCA-8 Eight Channel Thermocouple Amplifier As supplied this product is direct Plug 'n' Play compatible with a NEXUS VCU, an Elite ECU CAN...

Haltech - O2 Sensor weld-on bung - 303 Stainless Steel Thread: M18 x1.5 O2 Sensor Weldable Fitting Bung and Blanking Plug M18 x1.5. Includes: 1 x...

Haltech - Bosch 145 PSI Fluid Pressure and Temperature Sensor (Thread: M10 x 1.0) Please take care when wiring this sensor as incorrect wiring will...

Link ECU - CAN Keypad (4, 8, 12 Button) Rugged 4,8,12 key CAN Keypad with interchangeable 15mm inserts (sold separately HERE).Custom button inserts...

Link ECU - Tuning Cable (CUSB) Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available...

Haltech - Coolant Temp Sensor - Large Thread Thread: 3/8 NPT 18TPI Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Haltech - Elite CAN Cable DTM-4 to OBDII Length: 1800mm (72") Connect your Elite ECU to an OBDII Bluetooth or Wireless Module Notes: Vehicle side O...

Haltech - 3 Bar Motorsport MAP Sensor Includes: Matching male Deutsch DTM-3 Connector (HT-031001) Other Information: 3 Bar Motorsport MAP Sensor(in...

Haltech - IO 12 Expander - 12 Channel with Flying Lead Harness Kit (CAN ID - Box A) Length: 2.5m (8') Outputs: 4 Digital Pulsed Outputs (DPO) 4 Dig...

Cantee Link CAN Splitter Cable Specs: DTM4 Female to 2 x DTM4 Male. Includes CAN and Power Wiring. Loom 1 Length: 80mm Loom 2 Length: 120mm DTM4 Pi...

Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older ...

Haltech - 250 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor Thread: 1/8 NPT Please take care when wiring this sensor as incorrect wiring will damage ...

Haltech - WB1 NTK - Single Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft) The Haltech Wideband Controller is a plug and play wideband s...

Haltech - GT101 Style High Frequency Hall Effect Sensor Size: 18mm Diameter Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch D...

Haltech - 5 Bar "TI" MAP Sensor Thread: 1/8 NPT Please take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " MAP...

Haltech - 1/4" Stainless Compression Fitting Kit - 1/8" NPT Thread Includes: Nut and Ferrule Notes: Compression ferrules are single use and must be...