Venom Automotive - Toyota JZA80 Bosch Drive By Wire Pedal Adaptor

Designed to accompany our Drive by Wire Adaptors for 2JZ-GTE VVTi/Non-VVTi, this adaptor piece will allow a universal Bosch DBW Pedal assembly (PN:0 280 755 051) to be bolted up in place of the original cable drive pedal assembly using existing bolt holes. No Drilling required.

CNC'd from 6061 Aluminium, the bracket is designed to replicate the original pedal location and feel.

FINISH

6061 Billet Aluminium - Black Anodised

INCLUDED

- 1x CNC'd Bosch to JZA80/MkIV Bracket - Black Anodised

- 7x M6 316 Grade Stainless Bolts

- 7x M6 316 Grade Stainless Washers

INSTALLATION TIPS

1. Contortion self under dash to remove OEM Throttle Cable and Pedal as per the Toyota Supra Repair Manual (TSRM)

2. Whilst still stuck under the dash, loosely install the upper two (2) M6 bolts with washers followed by the lower bolt/washer through the bracket last. The upper bolt holes are slotted to provide ease of installation. Some fiddling with the firewall blanket may be required but no cutting is required!

3. Tighten down the adaptor bracket to the firewall.

4. Install the Bosch Pedal Assembly, it may pay to have already plugged in the harness (not included) as spare behind the dash is tight.

5. Complete wiring and tuning of the pedal and installation of the Throttle Body Adaptor on the engine.