Dyno-Mite Performance

When you have a high performance engine revving to 10,000 revs the OEM plastic pulley tend to distort, break and even melt under high revving appli...

Torrington bearing kit is for that big power Barra. We found that when large power applied especially in drag situations the crank moves slightly a...

Power steering pulley is 20% underdrive which will slow the power steering pump down when at high RPM. Ideal for drag racing, drifting, speedway. G...

Dyno-Mite spec Valve springs. Good for up to 35psi.  Usually valve float occurs in the Barra engine anywhere from 330kw upwards. These have been sp...

Dyno-Mite Performance Copper head gasket and fire ring kit, Kit options include: - .034" thickness Copper head gasket and 6 x Grooved .039" phosph...

Suits Ford BA-FGX Engines  When you remove the variable cam gears or the Variable Cam Timing. You need a fixed gear in place of the vct gears to di...

The Super Damper has a larger diameter also high inertia which is ideal for that big HP Barra engine. The ATI Super Damper® is the only damper desi...

50% slower spinning for racing applications. Faster spinning engines like drift or drag applications require the alternator to spin at correct spee...

These VCT deletes are for a BF-FG head as they are a larger diameter. When you delete the Oem Variable valve timing with the Vernier gears. Use the...

When going higher Power you will need a different cam which then will need to eliminate the hydraulic lifters. This kits replaces them to Rev that ...

These VCT deletes are for a BA head as they are a smaller diameter. When you delete the Oem Variable valve timing with the Vernier gears. Use these...

How many times have you heard of the timing chain has jumped a tooth. We have found that at high revs, the Oem timing chain tensioner's small ratch...

Australian made con rods that are made out of 300m Cryo'd material at the highest specs to ensure that 10,000rpm engine. Looking forward to hearing...

Australian made Complete set (24) Tested/developed/proven in our own 2000HP+ 10,000RPM+ BARRA engines.  We have had many stock rockers break in the...

Race intake manifold from Dyno-Mite Performance featuring twin fuel rails and 100mm throttle body. As seen on Maria's 2200hp Falcon & the Dyno-...