This Nissan Silvia S14*/S15 SR20 Low-mount Turbo kit was designed to bolt up to either our GRP Fabrication 3" cat back exhaust system or any S14/15 catback exhaust retaining the factory 2 bolt position. *S14 will need to either use a S15 water neck or drill & tap/weld a port for the water line kit.
This Turbo Kit can be optioned with the Plazmaman Intercooler kit in order to provide an all-inclusive Turbo, Intercooler & Piping kit. Alternatively, Only the Intake + Upper & Lower Hotside Pipe can be selected with custom lower hot side & cold side piping needed to work with your existing intercooler.
Following the trend of all GRP Fabrication products months of design and development has gone into making sure the end product is the highest quality kit available on the market, and its fabricated right here in Australia.
Having connections with all the leading global suppliers it's no surprise to find this kit contains products from Artec, Garrett, K&N & Turbosmart, if reliability and performance is your No 1 goal then GRP have you covered.
We have organised this kit with several options as listed below, If you have any further questions prior to ordering this kit please contact us via phone or email to discuss your build.
All kits include standard:
- Garrett G series Turbocharger
- Artec low mount Vband manifold
- Complete oil and water line kit
- 3.5" Stainless fabricated dump pipe inc Gasket and bolts
- Stainless exhaust manifold gaskets
- Manifold studs and nuts
(please note if no hotside/intake pipe is optioned turbocharger does not include elbows welded on both the compressor housing inlet and outlet)
Please see the drop down options for additional items for the kit.
Add Hotside & Intake Pipe
- Hotside and Intake pipe will be needed as a starting point on a custom set up. If not selected you can fabricate your own intake and hot side intercooler pipe.
- K&N Air Filter
- If selected, we will modify the turbo by welding on cast elbows to the inlet/outlet of the compressor housing.
Add Hotside & Intake Pipe + Intercooler
- This all-inclusive option provides the most optimal way to purchase our Turbo Kit. A Plazmaman bar & plate intercooler along with all necessary pipework and hardware will be provided for a complete bolt on option. *Provisions for the pipe work will need to be cut out of the vehicle.
- K&N Air Filter
- If selected, we will modify the turbo by welding on cast elbows to the inlet/outlet of the compressor housing.
World wide shipping available please email if outside Australia for shipping quotes.
Please note Not included
This kit is to be used with a standalone ECU, in the case of our test vehicle a Haltech Elite 1500.
For other information regarding our S14/S15 Exhaust and Turbo Kit see our GRP Engineering S14/S15 R&D Blog Post
