Haltech Inputs and CAN Expansion Products

1/4" Open Tip Thermocouple only - (1.30m) 51" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple ampli...

1/4" Open Tip Thermocouple only - (2.10m) 82-1/2" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple a...

Upgrade Your Connectivity with this CAN Adaptor Loom Suits: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series...

Haltech Driveshaft Split Collar 1.875" / 47.63mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 1.875"/ 47.63mm I.D. 8 Magnet 1 x 5/32 Allen K...

Suits: IO12 Expander Box WBC1, & WBC2 Controller Device Emulator 8 Includes: Pack of 24 Pins.

1/4" Open Tip Thermocouple only - (2.21m) 87" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple ampli...

PD16 Flying Lead Harness - 5M Suits: Nexus PD16. Includes: Wire in Harness, 5 meters (16ft) in Length - Suits Nexus PD16. TXL Wire. Main Connector...

Throttle Position Sensor -Black CCW Rotation 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Black Counter Clockwise Rotatio...

Please take care when wiring this sensor as incorrect wiring will damage this sensor! All Honeywell Pressure sensors are individually electronicall...

Plug and Pins Only - Delphi 3 pin GM Style MAP Sensor Orange Suits: HT-010104 - 3 Bar GM MAP Sensor HT-010106 - 4 Bar GM MAP Sensor Includes: Pack ...

1/4" Open Tip Thermocouple only - (2.44m) 96" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple ampli...

1/4" Open Tip Thermocouple only - (1.87m) 73-1/2" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple a...

Used to mount linear position sensors to the chassis of a vehicle Suits: 1/2"-20 Threaded Bolts Includes: 2 x Mounting nuts , 2 x #8-32 / 2 x #10-3...

Please take care when wiring this sensor as incorrect wiring will damage this sensor! All Motorsport MAP and Pressure sensors are individually elec...

1/4" Mild Steel Weld-on Base Only  

As supplied this product is direct Plug 'n' Play compatible with an Elite ECU CAN port, Elite ECU Harness CAN connector or multiple CAN device inst...

This product emulates Haltech TCA-4 Box A and TCA-4 Box B. This unit will display in ESP online or ECU Manager as a TCA-4 Box A and a TCA-4 Box B. ...

O2 Sensor weld-on bung - 6061 Aluminium Suits: M18 Thread Oxygen Sensors Includes: 1 x 6061 Aluminium Weld On Bung

Dual Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins.

Haltech Driveshaft Split Collar 2.187" / 55.55mmI.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 2.187"\ 55.55mm I.D. 8 Magnet Notes: 8 magnet p...

Laser Ride Height Sensor Outputs: 0-5v Analogue Output. Includes: Connection cable, matching male Deutsch DTM-3 Connector (HT-031001), protective g...

Weld Fitting M12 x 1.5 - Small Thread Water Temp Aluminium Suits: Coolant Temp Sensor - Small Thread

1 Bar GM MAP Sensor Includes: Matching plug and 3 pins. Other Information: A Haltech MAP sensor (manifold absolute pressure) provides instantaneous...

Haltech - Triple Switch Panel Kit 12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Triple Switch Panel Only - includes Yellow & Red knobs ...