Haltech Inputs and CAN Expansion Products

Haltech - Hitachi R35 Ignition Coil Genuine Hitachi "R35" Ignition Coil with mating connector, pins, and seals. All dressed up with a Haltech Label...

Haltech - Aluminum Shock Sensor Mounting Nuts - 1/2" -20 Length: 1 1/2" / 38.2mm Used to mount linear position sensors to the chassis of a vehicle ...

Haltech - 1/4" Open Tip Thermocouple only - (1.64m) 64-1/2" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 ther...

Haltech - 1/4" Mild Steel Weld-on Base Only  

Haltech - CAN Adaptor Loom DTM-4 to 6-Pin Circular Connector Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thund...

Haltech - Driveshaft Split Collar 2.187" / 55.55mmI.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 2.187"\ 55.55mm I.D. 8 Magnet Notes: 8 magnet...

Haltech - Laser Ride Height Sensor Length: 25mm (1") to 500mm (19.5") Range Outputs: 0-5v Analogue Output. Includes: Connection cable, matching mal...

Haltech - Weld Fitting - Aluminium Thread: M12 x 1.5 Suits: Coolant Temp Sensor - Small Thread

Haltech - 1 Bar GM MAP Sensor Includes: Matching plug and 3 pins. Other Information: A Haltech MAP sensor (manifold absolute pressure) provides ins...

Haltech - Triple Switch Panel Kit 12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Triple Switch Panel Only - includes Yellow & Red knobs ...

Haltech - Dual Switch Panel Only Dual Switch Panel Only - includes Yellow knob Other Information: Compatible with a Haltech 12 Position Rotary Trim...

Haltech - 1/4" Open Tip Thermocouple only - (1.75m) 69" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermoco...

Haltech - SurLok Nexus PD16 120A Red Connector Suits: Nexus R3 and PD16 Includes: 1 x 120A Red SurLok Connector.

Haltech - CAN Cable DTM4 to Circular Connector - 1200mm Suits TCA-8 Length: 1.2M Suits: TCA-8 Suits TCA-8 Eight Channel Thermocouple Amplifier. C...

Haltech - Driveshaft Split Collar 2.125"/ 53.98mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 2.125"/ 53.98mm I.D. 8 Magnet 1 x 5/32 Allen ...

Haltech - Plug and Pins Only - 12 Pin Tyco Suits: DRA Digital Reluctor Adaptor. Includes: Pack of 12 Pins.

Haltech - Throttle Position Sensor - Grey CW Rotation 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Grey Clockwise Rotatio...

Haltech - IO 12 Expander- 12 Channel (CAN ID - Box B) Outputs: 4 Digital Pulsed Outputs (DPO) 4 Digital Pulsed Inputs (DPI) 4 Analogue Voltage Inpu...

Haltech - 1/4" Open Tip Thermocouple only - (1.41m) 55-1/2" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 ther...

Haltech - 1/4" Stainless Steel Weld-on Base Only

As supplied this product is direct Plug 'n' Play compatible with an Elite ECU CAN port, Elite ECU Harness CAN connector or multiple CAN device inst...

Length: 2.4m (96") Haltech Tyco CAN adaptor harness for Haltech IQ3 & EFIUCAN Suits: Allows a direct Plug 'n' Play CAN connection of a Haltech ...

Haltech - Wideband Adaptor Harness - 400mm Suits: NEXUS Series devices Includes: 1 x DTM-6 to Superseal Pins Harness Notes: Pre terminated with AMP...

Haltech - SurLok Nexus R3/PD16 120A Black Connector Suits: Nexus R3 Includes: 1 x 120A Black SurLok Connector