Haltech Inputs and CAN Expansion Products

Dual Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins.

TMS-4 OVERVIEW The TMS-4 can fire several optional trouble codes, including: Pressure High / Pressure Low Temperature High Air Leak Detected Sen...

Haltech Driveshaft Split Collar 2.125"/ 53.98mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 2.125"/ 53.98mm I.D. 8 Magnet 1 x 5/32 Allen Ke...

Haltech Driveshaft Split Collar 1.875" / 47.63mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 1.875"/ 47.63mm I.D. 8 Magnet 1 x 5/32 Allen K...

Suits: DRA Digital Reluctor Adaptor. Includes: Pack of 12 Pins.

Rare Earth Magnets (5mm DIA x 2mm H)  

Used to mount linear position sensors to the chassis of a vehicle Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32...

Used to mount linear position sensors to the chassis of a vehicle Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32...

Used to mount linear position sensors to the chassis of a vehicle Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32...

Used to mount linear position sensors to the chassis of a vehicle Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32...

Used to mount linear position sensors to the chassis of a vehicle Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32...

Used to mount linear position sensors to the chassis of a vehicle Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32...

Used to mount linear position sensors to the chassis of a vehicle Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32...

Used to mount linear position sensors to the chassis of a vehicle Suits: Haltech Linear Position Sensors Includes: 1 x Weld On Tab Notes: Suits 1/2...

Throttle Position Sensor -Grey CW Rotation 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Grey Clockwise Rotation 1 x Oppos...

Adaptor - Brass 1/8"NPTF to 3/8"NPTF Suits: 1/8" NPT Sensors Includes: Adaptor Only Notes: Tightening Torque: 1.5 - 3 TPFT (Turns past finger tight)

Bosch 4000 PSI Fluid Pressure and Temperature Sensor Includes: Includes: Matching plug, pins and seals Notes: Used to measure fluid pressure and te...

Length: 2.5m (8') IO 12 Expander Box - 2.5m/8ft Flying Lead Harness Only As supplied this product is direct Plug 'n' Play compatible with an Elite ...

Plug and Pins Only 24 Pin TYCO As supplied this product is direct Plug 'n' Play compatible with an Elite ECU CAN port, Elite ECU Harness CAN connec...

Triple Switch Panel Only - includes Yellow & Red knobs Other Information: Compatible with a 12 Position Rotary Trim Module (HT-010504)Includes...

Length: 1.5m (3') TCA4 - 1.5m/3ft Flying Lead Harness Only Notes: Only required if using the optional 0-5 V analogue outputs.

Length: 1.5m (3') TCA4 - 1.5m/3ft Flying Lead Harness Only Notes: Only required if using the optional 0-5 V analogue outputs.

1/4" Open Tip Thermocouple only - (2.32m) 91-1/2" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple a...

1/4" Open Tip Thermocouple only - (1.41m) 55-1/2" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple a...