Haltech ECU Inputs and O2 Wideband Controllers

Haltech Flex Fuel Composition Sensor Suits: 3/8 "GM Spring Lock" fittings. Includes: Matching plug and 3 pins.

Air Temp Sensor - 1/8 NPT Thread Includes: Matching male Deutsch DTM-2 Connector (HT-031000). Notes: 127 deg C (260 F) Max reading.

Haltech - Coolant Temp Sensor - Small Thread (Thread: M12 x 1.5) Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Haltech - Air Temp Sensor - Small Thread M14 x 1.5 Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Pressure Sensor Extension Kit Suits: 1/8th NPT Thread MAP, Oil and Fuel Pressure sensors. Includes: Fragola -4 AN Hose with Male & Female 1/8th...

Haltech - 150 Psi "Ti" Fuel/Oil/Wastegate Pressure Sensor Thread: 1/8 Npt Includes: Matching Delphi Plug And 3 Pins, -4 An Adaptor. Notes: "Ti" Pre...

Haltech - 12 Position Rotary Trim Module (Boost/Fuel/Ign, etc) HT-010504 - 12 Position Rotary Trim Module. Other Information: 12 Position Rotary Tr...

Haltech 4 Bar Motorsport MAP Sensor Includes: Matching male Deutsch DTM-3 Connector (HT-031001).

Flex Fuel Fittings 3/8 "GM Spring Lock" - 6AN Male Suits: GM Flex Fuel Sensors. Includes: Two fittings.

Haltech - Coolant Temp Sensor (Thread: 1/8 NPT 27TPI) Includes: Matching male Deutsch DTM-2 Connector (HT-031000). Notes: 127 deg C (260 F) Max rea...

Haltech - Oil Temperature sensor High Range (Thread: 1/8 NPT 27TPI) Oil Temperature Sensor High Range 150°C. Includes: Matching Bosch EV1 plug &...

Haltech - "Red" Single Channel Hall Effect Sensor (Thread: M12x1.0) Suits: Wheel Speed, Crank/Cam, etc. Includes: Matching set of Deutsch DTM 3 con...

Knock Sensor - Genuine Bosch Suits: 8mm (5/16") mounting bolt. Includes: Matching plug and 2 pins.

Haltech - 1/4" Nut and Brass Ferrule Only Notes: Compression ferrules are single use and must be replaced when replacing probes.

Haltech - Air Temp Sensor Thread: 1/4 NPT Air Temp Sensor - 1/4 NPT Thread - Suits Nissan Z32 300ZX Suits: Nissan Z32 300ZX intake. Includes: Match...

Haltech - Air Temp Sensor - Thread: 3/8 NPT 18TPI Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Delphi 3 Pin Pressure Sensor Connector - Plug and Pins Only Suits: 5 Bar TI MAP Sensor (HT-010110). 5 Bar Motorsport Stainless Steel Diaphragm MA...

As supplied this product is direct Plug 'n' Play compatible with a NEXUS VCU, an Elite ECU CAN port, Elite ECU Harness, CAN connector, or multiple ...

Haltech - Bosch 145 PSI Fluid Pressure and Temperature Sensor (Thread: M10 x 1.0) Please take care when wiring this sensor as incorrect wiring will...

Haltech - 3 Bar Motorsport MAP Sensor Includes: Matching male Deutsch DTM-3 Connector (HT-031001) Other Information: 3 Bar Motorsport MAP Sensor(in...

Haltech - Coolant Temp Sensor - Large Thread Thread: 3/8 NPT 18TPI Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Haltech - 250 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor Thread: 1/8 NPT Please take care when wiring this sensor as incorrect wiring will damage ...

Haltech - GT101 Style High Frequency Hall Effect Sensor Size: 18mm Diameter Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch D...

Haltech - 5 Bar "TI" MAP Sensor Thread: 1/8 NPT Please take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " MAP...