Link Engine Management

Link ECU - Link MXG Strada 7" Dash - Race Edition Link MXG Strada 7” dash, powered by AIM.The Link MXG Strada Race Edition is a full colour, 7-inch...

Link ECU - Link MXS Strada 5" Dash - Street Edition Link MXS Strada 5” dash, powered by AIM.The Link MXS Strada Street edition is a full colour, 5-...

Link ECU - Link RACEPAD - Steering Wheel CAN Keypad RacePad is the ultimate CAN-bus steering wheel button panel designed to elevate your racing exp...

Link ECU - Link MXS Strada 5" Dash - Race Edition Link MXS Strada 5" Dash, powered by AIM.The Link MXS Strada Race Edition is a full colour, 5-inch...

Link ECU - AIM GPS09 Module for AIM Dashes Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.Features: Sample lap and split t...

Link ECU - G4X XtremeX ECU + Terminated LS Engine Harness Drive-by-Wire Bundle The quickest, easiest, tidiest and most cost effective way to connec...

Link ECU - G4X StormX ECU + Terminated LS Engine Harness Drive-by-Cable Bundle The quickest, easiest, tidiest and most cost effective way to connec...

Link ECU - Terminated Engine Harness GM LS GEN3/4 Terminated Engine Harness to cover a wide range of GM LS Engine Variations. Please note that due ...

Link ECU - LS Gen 4 Knock Adapter Loom Intended for use with our terminated LS engine harness. Plug and play compatibility with Gen 4 Knock Sensor...

Link ECU - LS DBW Adapter Loom • Intended for use with our terminated LS engine harness. Plug and play compatibility for Gen 4 LS DBW throttle bodi...

Link ECU - LS Gen 3 to Gen 4 Cam Sensor Conversion Harness Adapter harness to run the Gen 4 front mounted under water pump Cam Sensor on the Gen 3...

Link ECU - LS Stepper Adapter Harness •    Intended for use with our terminated LS engine harness. Plug and play compatibility with GM LS IAC stepp...

Link ECU - LS Map Adapter Harness •    Intended for use with our terminated LS engine harness. Plug and play compatibility for Gen 3 LS map sensors

Link ECU - LS Gen 3 Knock Adapter Loom •    Intended for use with our terminated LS engine harness. Plug and play compatibility with factory Gen 3 ...

Link ECU - E-throttle (RET) Link's external E-throttle (Drive by Wire) module works with Link's G4X ECUs (except the entry level AtomX), plus G4+ E...

Link ECU - Automotive Wire Pack 50m (4 Colours) 50m pack of Automotive Wire (4 colours). 20m x Red10m x Black10m x Red/Green10m x Green Wire Spec: ...

Link ECU - 10m 4 Core CAN Wiring 10m 4 Core CAN Wiring. Useful for wiring in CAN Accessories. Four internal wires (White, Green, Red, Black) in a P...

Link ECU - CANEXT - CAN Extension Cable 2m 2 meter CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN dev...

Link ECU - Cable (CANPCB) Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF ...

Link ECU - CANSS - CAN Connection Cable for WireIn ECU’s (ECU Header CAN) Required to add CAN communication to WireIn ECU's which have CAN accessib...

Link ECU - Plug (CANF) Field Installable CAN Plug - Can be used to wire in to the 6 pin CAN port on Link G4/G4+/G4X ECUs that have a round 6 pin CA...

Link ECU - CAN Gauge - Daisy Chain Cable Use to link two or more CAN Gauges together.

Link ECU - Pin Kit E (TKE) Plug and Pin Kit only, E Plug. Includes: 1 x 26 position Superseal Connector Housing "E Plug" 26 x Superseal Terminals ...

Link ECU - Pin Kit A (TKA) Equivalent plug and connectors as "A" Loom. Plug and Pin Kit only.Suitable for:  All Link G4X WireIn ECU’s (Note: Loom ...