New Arrivals

Link ECU - Trigger Wheel (TWL) Large Diameter Trigger wheel – Small and Medium sizes also available. 60-2 tooth 200mm diameter 40mm centre

Link ECU - IGN1A - High Powered Inductive Smart Coil (Integrated Ignitor) High Power Inductive Coil with built-in ignitor. Produce 103 mJ per spar...

Link ECU - Three Channel Inductive Igniter (I3) This three channel igniter is suitable for electronic ignition applications.  Required when using c...

Link ECU - Knock Sensor (KNS) Donut style 8mm hole Includes plug and pin kit 

Link ECU - Knock Sensor with Loom (KNSB) Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or us...

Link ECU - KnockLink G4 (G4KNL) KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race u...

Link ECU - G4 KnockLink Kit - Includes Knock Sensor+Loom (G4KNLK) Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. ...

Link ECU - KnockBlock G4+ (KNB) The G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing,...

Link ECU - Hall Effect Sensor Kit Hall effect sensor designed for use in applications where ferrousedge detection/near zero speed sensing is needed...

Link ECU - Exhaust Gas Temperature Probe (EGT) Extreme Duty Fast Response EGT Temperature Probe  Type K thermocouple probe Exposed sensing junctio...

Link ECU - Crank Angle Sensor (CAS) Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can ...

Link ECU - Throttle Position Sensor (TPSCW/CCW) Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lea...

Link ECU - Mounting Boss Steel (IATBMS) Weld in Steel Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other senso...

Link ECU - Mounting Boss Aluminium (IATBMA) Weld in Aluminium Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and oth...

Link ECU - Mounting Boss Steel (IAT1-8MS) Weld in steel boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Tempe...

Link ECU - Mounting Boss Aluminium (IAT1-8MA) Weld in Aluminium boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coola...

Link ECU - Air Temperature Sensor (IATB) Includes Plug Kit - 2 way Bosch Style plug, terminals and boot Aluminium and steel weld in mounting bosse...

Link ECU - Adapter M10 x 1 Female to 1/8 BSP Male Stainless Steel thread adapter, M10 x 1 Female to 1/8 BSP Male, Adapts popular Bosch Metric Press...

Link ECU - Adapter M10 x 1 Female to 1/8 NPT Male Stainless Steel thread adapter, M10 x 1 Female to 1/8 NPT Male, Adapts popular Bosch Metric Press...

Link ECU - 140 Bar Pressure Sensor (HPS) High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x...

Link ECU - Combined Pressure and Temperature Sensor (CPTS) Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg...

Link ECU - Pressure Sensor (PS150) Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Technical Specs and WiringUp to 1...

Link ECU - 1.15 Bar MAP Sensor (MAP1.15) The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in ...

Link ECU - 2.5 Bar MAP Sensor (MAP2.5) The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo ...