Venom Automotive

1JZ-GTE (VVTi & Non-VVTi) Titanium Exhaust Manifold Stud, Nut & Washer. Machined from Titanium (Ti-6AI-4V) with a 5mm Hex Key Head, this st...

Nissan RB25 Titanium Exhaust Manifold Stud, Nut & Washer. Machined from Titanium (Ti-6AI-4V) with a 5mm Hex Key Head, this stud kit is designed...

Designed to accompany our Drive by Wire Adaptors for 2JZ-GTE VVTi/Non-VVTi, this adaptor piece will allow a universal Bosch DBW Pedal assembly (PN:...

Venom Automotive 1JZ Drive By Wire (DBW) Throttle Body Adaptor is design to mount a Bosch 74mm (PN: 0 280 750 474 - Not Included) to the OEM Intake...

Venom Automotive Ford BARRA Titanium Exhaust Manifold Stud, Nut & Washer. Machined from Titanium (Ti-6AI-4V) with a 5mm Hex Key Head, this stud...

Oil Return Adapter kit for 2JZ Engines, this adapter bolts into the oil plan replacing the factory oil return flange. Perfect for AN Style lines an...

Venom Automotive Distributor Delete Cap is CNC'd from 6061 Alloy and designed to blank off the distributor housing on the RB30 Engine.This item wil...

Our design allows the thermostat to remain in the original position, improving flow and allowing the thermostat bypass port to suitably closed when...

2JZ-GTE and 2JZ-GE Titanium Exhaust Manifold Stud, Nut & Washer. Machined from Titanium (Ti-6AI-4V) with a 5mm Hex Key Head, this stud kit is d...

Please note these are a clearance item for a special discounted price, once these are gone we cannot source them again for this price. CNC 6061 Bil...

These Remote Oil Filter Relocation Adapters are designed to suit -10AN lines for the best possible oil flow. However, it will also suit -8AN Lines ...

Venom Automotive - Toyota 1JZ / 2JZ Billet Oil Filter Adapter Plate Our Oil Filter Adapter Plate Kit is designed to suit all 1JZ-GTE, 2JZ-GE & ...

Venom Automotive 2JZ-GTE Non-VVTi IACV delete plate for deleting the IACV Valve FINISH CNC Billet 6061 Aluminium - Black or Raw Finish INCLUDED -1...

Venom Automotive - Toyota 2JZ Oil Level Sensor Cap/Oil Drain Adapter This adapter plate bolts into the oil pan replacing the factory oil level sens...

Billet Solid Shifter Bushings to suit V160 V161 R154 & W58 Gearboxes. Designed to remove that loose, sloppy shift feeling, providing a more pre...

Nissan RB30 Titanium Exhaust Manifold Stud, Nut & Washer. Machined from Titanium (Ti-6AI-4V) with a 5mm Hex Key Head, this stud kit is designed...

2JZ-GTE Titanium Intake Manifold Stud, Nut & Washer. Machined from Titanium (Ti-6AI-4V) with a 5mm Hex Key Head, this stud kit is designed to f...

Nissan SR20 Titanium Exhaust Manifold Stud, Nut & Washer Kit. Machined from Titanium (Ti-6AI-4V) with a 5mm Hex Key Head, this stud kit is desi...

These are a perfect press-fit for all JZA80 / MKIV/ JZZ30/ UZZ30 Rear Subframes. This is for a full set including the Diff Ears and the Rear Diff t...

Venom Automotive 2JZ-GTE VVTi Drive By Wire (DBW) Throttle Body Adaptor is design to mount a Bosch 74mm (PN: 0 280 750 474 - Not Included) to the V...

Venom Automotive 2JZ-GTE Non-VVTi Drive By Wire (DBW) Throttle Body Adaptor is design to mount a Bosch 74mm (PN: 0 280 750 474 - Not Included) to t...

Venom Automotive 2JZ Alternator Support Bracket to reinforce the lower alternator tab on the 2JZ-GE & GTE blocks. Commonly these tabs are break...

1JZ-GTE Titanium Intake Manifold Stud, Nut & Washer. Machined from Titanium (Ti-6AI-4V) with a 5mm Hex Key Head, this stud kit is designed to f...

Front Number Plate Holder JZA80 Billet Front Number Plate Mount to replace the fatigued plastic factory mount. Designed to better suit rectangular ...