Atomic - BA-FG Barra Complete Engine StreeTorquer 475 Package

Atomic - BA-FG Barra Complete Engine StreeTorquer 475 Package

Due to the complexity of this package, please contact our sales team to confirm any additional options and to receive a shipping quote. Freight may be charged additionally due to the size of the product.  

Email: sales@golebysparts.com.au
PH: 07 4633 0157

#306370-475-BA
Atomic StreeTorquer 475 Long motor suit BA.

#306370-475-BF
Atomic StreeTorquer 475 Long motor suit BF.

#306370-475-FG
Atomic StreeTorquer 475 Long motor suit FG.

• Ultrasonic tested seasoned Ford block – the thickest walls are required (we reject 4 in 10 for being like Cleveland blocks - too thin in spots due to core shift).
• Full crankshaft preparation - magnafluxed, stress relieve/temper, checked for index/stroke, reground and/or micro-polished journals and chamfered oil holes.
• HyperTec hi-silicon pistons – 8.7:1 comp ratio and include coated skirts.
• Chrome Steel Turbo Piston Rings.
• Atomic billet conrods – 6.060” C/C, bushed for floating pins, ARP 2000 bolts and cylindrically ground/honed tunnels.
• ACL Competition bearings – conrods and mains.
• Atomic Competition Gasket and seal kit including MLS-D diesel style head gasket.
• Fully machined block inc torque plate honed cylinders, decked to crank centreline, main saddle alignment checked, etc.
• Bearing clearances set up to suit the intended usage.
• Fully prepped (seasoned) Atomic cylinder head. Serviced with a multi-angle valve job, fine Ra finish on deck, new O-Series turbo exhaust valves fitted, spring tensions set up and new Atomic #306044 valve stem seals.
• New hydraulic lifters with preloads set.
• Atomic H/Duty Simplex timing chain #306620.
• Atomic billet crank sprocket #306562.
• Atomic HD timing chain tensioner #306563.
• Precision balanced.
• OE Ford balancer with CRMO washer and HD hex head bolt.
• Atomic Billet cams (OE profiles).
• Atomic H/D Conical valve springs #306800.
• Atomic Head stud kit - 12mm #306651 with oversize washers #306675-14
• Atomic All Steel Billet gear oil pump #306751-S Complete with EDM cut chrome moly gears #306750, Billet steel end plate #306753, Grade 10 fasteners, high flow bypass circuitry, blueprinted clearances and high-pressure spring.
• Atomic chrome moly timing guide pivot #306564.
• Atomic gasket set inc MLS head gasket.
• Fit new brass welch plugs.
• Spray block grey in hi-temp engine enamel (or any other colour you prefer).
• Powder coated rocker cover – your choice of 2 colours.
• Precision blueprinting and assembly of long motor.
• The engine is fully test run in our engine test cell - verify all vitals of the engine (oil pressure hot and cold, ring bed-in, cylinder % leak down, lifters bled, etc) and full report supplied.
• Supply torque specs manual, run-in procedure sheet and USB of engine operation on the test bench.
• Supply 14 litres of Run-in 15W/40 oil.
• Supply genuine Ford oil filters.
• 12 months conditional warranty (see website for details).

*A long engine is complete from sump to rocker cover and all engines are partially run-in on our engine test cell to ensure everything is 100% spot-on before shipping.*

• Atomic hi tensile alloy steel main cap girdle (optional).
• Atomic billet Parabolic pivoting guide (optional).
• Range of performance camshaft profiles (optional).
• Atomic Roller rockers (optional).

Note prices and specifications are subject to change.