Garrett - BA/BF Barra Bolt On GTX3582R GEN II Turbocharger Upgrade

This custom built Garrett GTX3582R GEN II is designed as a bolt on Upgrade Turbochargers for the Ford Falcon BA-BF XR6 Turbo. With 800 flywheel horesepower capabilities, the GTX3582R GEN II is for the serious users who want to make over 700rwhp, in a low mounted factory bolt on combination. The GTX3582R GEN II comes with a specifically designed 1.15a/r Turbine Housing, with an upgraded 40mm Wastegate flapper.

• Bearing Type: Ball Bearing

• Cooling System:Oil & Water Cooled

• Horsepower: 600-800hp

• Application: Ford Falcon XR6 BA/BF Models

• Actuator: Turbosmart 14psi (supplied with additional 5psi spring to bring the minimum boost to 19psi if required)

• Expected Power: Proven 500rwkw+ with supporting modifications, and E85 fuel

PRODUCT FEATURES:

• Turbine Housing - 1.15a/r Turbine Housing allows for the ultimate in performance and reduced back pressure, without sacrificing excessive boost response.

• Factory Turbo Orientation - Oil Feed, Oil Drain, Water Lines and Dump Pipe connection is in an identical position to the factory setup, allowing for easy re-fitment.

• Factory Turbo Position - These turbochargers still look very similar to a factory unit, and utilize the factory manifold, and exhaust system.

• Ultimate Boost Control - Largest Wastegate Porting, and largest Wastegate flapper to match, ensuring consistent boost control throughout the rev range.

• Supporting Re-Fitment Parts - Dump Pipe Studs & Locking Nuts, and a complete Turbocharger Gasket Kit is included.

SO, WHATS LEFT TO DO ONCE IT'S FITTED?

• Compressor Inlet Hose/Pipe - The factory turbocharger has a 3.0" Inlet, the GTX3582R GEN II has a 4.0" Inlet. A simple reducer hose, or a little fabrication may be required to adapt to your intake existing setup. We recommend using a pre-fabricated Airbox to suit (Plazmaman)

• Compressor Outlet Hose/Pipe - The factory turbocharger has a 2.0" Outlet, the GTX3582R GEN II has a 2.5" Outlet. Again, this can be as simple as a reducer hose, or some minor fabrication to make it all go together.

Thats It! - Extremely simple to re-fit, with minimal modifications to adapt to your existing setup!