Skip to content
Link ECU - IGN1A - High Powered Inductive Smart Coil (Integrated Ignitor)

Link ECU - IGN1A - High Powered Inductive Smart Coil (Integrated Ignitor)

SKU 101-0291
by Link Engine Management
$154.00
$154.00
$154.00 - $154.00
$154.00

Link ECU - IGN1A - High Powered Inductive Smart Coil (Integrated Ignitor)

High Power Inductive Coil with built-in ignitor.

  • Produce 103 mJ per spark, with a longer spark duration (2.9 ms) than what you’d see with a capacitive discharge
  • Built-in ignitor with external heat sink
  • Requires HEI-type plug wire ends/ boots. Compatible with most brands of HT lead
Box Contents
1 x IGN1A Smart Coil
1 x Mating Connector Kit
Connector Pinout: A – Ignition signal from ECU B – Logic ground, connect to ECU ground C – Spark wire ground, connect to cylinder head D – Power ground, connect to battery negative E – 12 volt power The coil dwell starts when a 5 volt signal is applied to pin A and the coil fires when the voltage drops to zero. The signal is similar to an LSx coil, although it does need a bit more current to trigger. Smart Coil specs: Minimum Output Voltage (no load, at recommended dwell): 40,000 volts Maximum Output Voltage: up to 81,000 volts (+/- 10%) Output energy: 103 mJ Spark duration: 2.9 ms Primary resistance: 0.5 ohms (not directly measurable) Primary inductance: 4.8 mH (not directly measurable) Secondary resistance: 8,500 ohms Secondary inductance: 22.5 H Turns ratio: 71.1 Maximum current: 19 amps Maximum battery voltage: 17 volts Nominal dwell: 3.0 ms Excessive dwell or duty cycle may cause meltdown. As with any race coil, the manufacturer does not provide a warranty.
Contact Us

Phone: (07) 4633 0157

Email: sales@golebysparts.au

Live chat with our staff during business hours.

Location

Unit 4, 82 Vanity Street, Toowoomba QLD, 4350, Australia.

Worldwide Shipping

We can ship Worldwide. Please contact our sales staff for international shipping options.

Zip Money
ZIP MONEY

12 Months Interest Free - Apply Now.