Radium - Bulkhead Fuel Pump Harnesses and Connectors

These metal (4-pin) and plastic (7 pin) bulkhead connectors were used in legacy Radium Engineering products prior to switching to threaded stud connectors. Limited stock is available of some of the old bulkhead versions. This page reflects current availability.
These part number will not be restocked once they are sold out.



If the correct pump connector for your application is not available on this page, then one of the part numbers above will need to be modified by cutting the wires and soldering on new connectors.

EXTERNAL ELECTRICAL CONNECTOR KIT
The kit 17-0034 can be used to construct a mating connector for 17-0001 or 17-0023 4-pin metal shell bulkheads.


Radium no longer stocks the mating flying-lead or connector kit for the plastic 7-pin bulkheads, these must be sourced elsewhere. Please contact info@radiumauto.com for more information.

PANEL REQUIREMENTS
All panels must be 0.06-0.18 inches thick. See the drawing below for cutouts for each bulkhead connector. A gasket is included on the large connector and the small connector includes an O-ring for sealing against panel surface.