Products

1JZ-GTE VVTi Aftermarket Exhaust Camshaft Seal. Would suit: 1JZ-GTE VVTi - Exhaust Cam.

GRP Engineering have put together a high quality and cost effective VRS Gasket Kit which includes the following: Multi Layer Head Gasket (11115-88...

GRP Engineering 1JZ Water Pump Seal Kit. Includes: Thermostat O Ring, Coolant hard pipe 2 bolt gasket. Water neck bypass pipe o-ring pair. Water ...

GRP Engineering - 1JZ-GE/2JZ-GE 'NA Head' Titanium Exhaust Manifold Stud Kit   Upgrade your Toyota 1JZ-GE or 2JZ-GE (Non-VVTi or VVTi) with the GRP...

GRP Engineering - 1JZ-GE/2JZ-GE 'NA Head' Titanium Intake Manifold Stud Kit   Upgrade your Toyota 1JZ-GE or 2JZ-GE (Non-VVTi or VVTi) with the GRP ...

GRP Engineering - 1JZ-GTE Titanium Exhaust Manifold Stud Kit   Upgrade your Toyota 1JZ-GTE (Non-VVTi or VVTi) with the GRP Engineering Titanium Exh...

GRP Engineering - 1JZ-GTE Titanium Intake Manifold Stud Kit   Upgrade your Toyota 1JZ-GTE (Non-VVTi or VVTi) with the GRP Engineering Titanium Inta...

Aftermarket Bellhousing bolt kit to suit 1JZ/2JZ engines. Suits R154, V161, A340, A341 etc.  5x Upper Bolts (91619-61250GRP). 2x Starter Motor Bol...

1JZ/2JZ Cam Cover Bolt Washer Set Suits all 1JZGE, 1JZGTE, 2JZGE and 2JZGTE engines. Other Information: Set of 16 seals.

1JZ/2JZ Cam/Crank Sensor Connector Suits all Toyota JZ motors. Other Information: Includes 1 connector, 2 pins and 2 plugs.

Injector Harness Adaptor Would Suit: Suits all JZ turbo engines. Other Information: 1JZGTE-VVTi engines only run one of these sensors, all others r...

GRP Engineering JZ aftermarket camshaft seal. This suits the following engines:1JZ-GE VVTi - Both Intake and Exhaust Cam1JZ-GTE VVTi - Intake CamAl...

1JZ and 2JZ VVTi/Non-VVTi Coil Plugs, Clips, Connectors. Would Suit: Suits all 1JZGTE and 2JZGTE Non-VVTi Engines with 6 Coil Packs. All 1JZGTE and...

1JZ/2JZ Crankshaft Position Sensor Would Suit: Suits all 1JZ and 2JZ turbo engines. Also fits any 2JZ non-turbo motors if a 2JZGTE oil pump is inst...

Toyota 1JZ/2JZ Drive Belt Tensioner Pulley Would Suit: Suits all Turbo and Non-Turbo engines, VVti and Non-VVti. Other Information: Pulley is stee...

1JZ/2JZ Fire Ring Copper Head Gasket GRP Engineering JZ Fire ring headgasket, Kit includes 1 x 0.047" Copper Head Gasket and 6 x 0.050" Phosphor Co...

1JZ & 2JZ Front Crank Seal Would Suit: Suits all 1JZ and 2JZ engines (Turbo and Non-Turbo, VVTi and Non-VVTi)

1JZ/2JZ MX83 Radiator Hoses Radiator hoses to suit 1JZGTE and 2JZGTE conversion into MX83 using standard MX83 Cressida radiator. Would Suit: Suits ...

1JZ/2JZ Oil Gallery Bungs Stainless ball bearings are installed from the factory to 4 galleries post-machining/cleaning. Removal of these is a must...