Products

1/4" Open Tip Thermocouple only - (1.64m) 64-1/2" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple a...

1/4" Open Tip Thermocouple only - (1.75m) 69" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple ampli...

1/4" Open Tip Thermocouple only - (1.87m) 73-1/2" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple a...

1/4" Open Tip Thermocouple only - (2.32m) 91-1/2" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple a...

1/4" Open Tip Thermocouple only - (2.44m) 96" Long Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple ampli...

1/4" Stainless Steel Weld-on Base Only

1AWG Terminated Cable Pair 2M, 4M, 6M - Suits R5 Suits: NEXUS R5 Includes: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 2m1 ...

Please take care when wiring this sensor as incorrect wiring will damage this sensor! All Honeywell Pressure sensors are individually electronicall...

Please take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " MAP and Pressure sensors are individually electroni...

Please take care when wiring this sensor as incorrect wiring will damage this sensor! All Motorsport MAP and Pressure sensors are individually elec...

Description: HT-010134 3 Bar Motorsport MAP Sensor Other Information: 3 Bar Motorsport MAP Sensor(includes HT-031001 - Male Deutsch DTM 3 Connector)

Please take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " MAP and Pressure sensors are individually electroni...

Thread: 1/8 NPT   Please take care when wiring this sensor as incorrect wiring will damage this sensor! All Motorsport MAP and Pressure sensors ar...

Please take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " MAP and Pressure sensors are individually electroni...

Length: 1200mm / 47.2" Suits: Selected Haltech Terminated Engine Harnesses Includes: 1 x HT-130348 - 6 Channel Ignition Extension Harness

Please take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " MAP and Pressure sensors are individually electroni...

Adaptor - Brass 1/8"NPTF to 3/8"NPTF Suits: 1/8" NPT Sensors Includes: Adaptor Only Notes: Tightening Torque: 1.5 - 3 TPFT (Turns past finger tight)

Air Temp Sensor - 1/4 NPT Thread - Suits Nissan Z32 300ZX Suits: Nissan Z32 300ZX intake. Includes: Matching Delphi plug and pins. Notes: 127 deg C...

Used to mount linear position sensors to the chassis of a vehicle Suits: 1/2"-20 Threaded Bolts Includes: 2 x Mounting nuts , 2 x #8-32 / 2 x #10-3...

Analogue Output Adaptor Outputs: Converts a PWM signal from an ECU output to a 0-5V analogue voltage signal Suits: e.g. TPS output to an AWD contro...

Boost Control Solenoid 4 Port, Used to control a wider range of boost pressure Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb ...

Bosch 4000 PSI Fluid Pressure and Temperature Sensor Includes: Includes: Matching plug, pins and seals Notes: Used to measure fluid pressure and te...

Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor Harness Notes: CAN Cable - DT-4 to DTM-4 Adaptor- Suits CAN Keypad - 200mm

Suits: Haltech CAN Keypads Includes: 5 Label Sheet (140 individual labels) Notes: A selection of pre designed, semi transparent labels to suit the ...