Sensors | Connectors | Spares

Haltech - Fuel Level Sender Signal Conditioner Outputs: Filters a resistive signal for use with an Analogue Voltage Input (AVI). Includes: HT-03101...

Haltech - 6 Circuit Haltech Fuse Box with Lid Includes: Matching pin set. Notes: Does not include relays or fuses.

Haltech - Delphi 3 Pin Pressure Sensor Connector - Plug and Pins Only Suits: 5 Bar TI MAP Sensor (HT-010110). 5 Bar Motorsport Stainless Steel Dia...

Haltech - Dual Crimper Set Inc 3 pin removal tools Includes: 2 x Open Barrel Crimper tools 3 x Removal tools CRIMPER AND PIN TOOL SET They say crim...

1JZ/2JZ IACV Patch Adapter Harness Syltech 1JZ/2JZ Idle Control Valve wiring adapter. This plugs into the factory wiring harness and converts it to...

Power Relay 30A Suits: Haltech Fuse Box. Notes: No mounting tab.

Syltech have one of the best range of temperature sensors to suit every application and now they have extended their range to include Grade 5 Titan...

Haltech - Firewall Rubber Wiring Grommet Diameter: 51mm (2") OD 21mm (13/16") ID

Haltech Plug and Pins Only - AMP 26 & 34 Pin 4 Row 3 Keyway Superseal Connector Set Suits: E8/11, PS1000/2000 and Elite 1000-2500 ECUs.  Black ...

Jaylec Alternator Adaptor Harness 3 Pin Oval Female Plug to 3 Pin Round Male Plug Used to convert late style (oval plug) to early style (round plu...

Syltech - 1/8″ NPT Pressure & Air Temp Combo 5 Bar MAP Sensor Not suitable for fluids - See Syltech - 1/8″ NPT Pressure & Temp Combo 10 Bar...

Haltech - USB Connection Cable 2m Suits: Platinum Sprint, Sport, Pro and Elite range of ECU's Includes: USB A to USB B Cable - 2 metres - USB 2.0 C...

Haltech - Firewall Rubber Wiring Grommet Diameter: 63.5mm (2.5") OD 44.45mm (1.75") ID Includes: 1 x 63.5mm (2.5") Firewall Grommet Notes: Outside ...

Haltech - Tacho Output Adaptor Outputs: 1 x Coil Negative emulated signal Includes: Matching Set of DTM 4 Connector plug and pins Notes: Requires S...

Haltech - ECU Pins only - Tyco Suits: 8-32 Pin Tyco Connector Range Includes: Pack of 10 Pins.

For use with Bosch LSU 4.9 Oxygen Sensors and some Electronic Throttle Bodies 1 987 280 016 Genuine Bosch mating connector Suits all LSU 4.9 s...

ATTENTION:1. The fuel level float shroud from Radium 20-0847-XXX is only compatible with newer Radium FCSTs (20-099X-XX) and FCST-Xs (20-199X-XX). ...

1 x Genuine Toyota 1JZGTE and 2JZGTE Camshaft Position Sensor Would Suit : Suits all JZ turbo engines Other Information: 1JZGTE-VVTi engines only ...

Haltech - Pins only - Suit Relays only in the 6 Circuit Haltech Fuse Box - Pack of 10

Borg Warner Speed Sensor, specific to the EFR range, measures the turbocharger RPM, to ensure the engine is utilizing the compressor efficiency tha...

Haltech - Toyota A340 PRNDL Signal Converter An interface box to take the multiple inputs from the range selector on the Toyota A340. and convert ...

Haltech - Plug and Pins Only - 16 Pin Tyco  Suits: Platinum PRO Plug-in Auxiliary I/O Platinum Sport GM Plug-in Auxiliary I/O TCA 2 & TCA 4 Eli...

Haltech - Plug and Pins Only - Flex Fuel Composition Sensor Includes: Pack of 3 pins.

Haltech - Plug and Pins Only - Delphi 2 Pin GM style Air Temp Connector Suits: HT-010200 - Air Temp Sensor - Small Thread HT-010202 - Air Temp Sens...