Skip to content
Luke-s-1JZGTE-Corona Goleby's Parts

Luke's 1JZGTE Corona


"Luke Explains" 

I bought the Rona as a rolling shell from Kristian in 2016 and had ET Chassis fab up a roll cage over the Christmas break. Due to another XT130 build I was in the middle of, this one sat on the back burner for the next 18 months.

In July 2017 the build finally gained some momentum with a trip to Goleby’s for the built motor and hot side fab, It then came back to ET for the diff and tubs.

Next Phase was to install a Powerglide from Gilroy's Race Transmissions and the rest of the fab work.

This first build was with standard intake and a precision 6766 which i achieved 702rwhp at 43psi and a 9.28 quarter mile pass only the 2nd time on track, but with super high intake temps and a not ideal convertor it was clear some things needed to be changed to safely run the 8 the car was built for.

At the beginning of 2022 the 6766 was swapped out for a 6870, a Plazmaman intake manifold was also added and all intercooler pipes upgraded from 2.5” to 3” which resulted in 836rwhp at 36psi. The gearbox was also treated to some billet gears and a converter tweak has it ready for the track.


Current PB (Aug 2022)

1/4 Mile ET 8.36 @162MPH 1.27 60 Foot 





Custom 6 Boost T4 Manifold

Turbosmart 50mm Gate

Precision 6870 T4 1.00 

4” Dump pipe to 3.5” stainless Exhaust 





Plazmaman intake manifold 

Plazmaman Custom Intercooler with 3” Plazmaclamps

Turbosmart Race Port BOV 



Gilroy's Race Transmissions Powerglide

GRT Converter

ET Chassis Sheet metal Hilux diff

Race Products Floater setup

Afco Coil overs and Custom 4 Link

Wilwood Rear Brakes, Hilux Front





Haltech Elite 2500

Haltech WBC1

Racepak Iq3 Dash

PRP R35 Coil Kit

Bosch Sensors



2 x Pierburg 360LPH Pumps

Turbosmart Billet Fuel filters

Bosch 1650cc Injectors

Plazmaman Fuel Rail

Turbosmart FPR1200

Goleby’s Parts Lines and Fittings





Goleby’s 900HP 1JZ-GTE non VVTI

ARP Head Studs 8740

Arp Main Studs

Acl Race Bearings

Camtech 282 Cams

Kelford Cams spring kit

Brian Crower Cam Gears

Toyota 2JZGTE oil pump

Leeson Engineering Billet Cam gear retainers

Ross Performance Billet tensioner bracket

Toyota water pump

Ross Performance Harmonic Balancer

Cp Pistons

Spool Conrods



Velo Race Seats, Harnesses and Steering Wheel

B & M Pro Ratchet Shifter

Performance Formula Wheels

Simpson Parachute





Kristian and Naomi From Goleby’s, Matt Stead from Steady Fab, Jamie from ET Chassis,

Scott Hoffman from Cleveland Exhaust,

Andrew From Gilroy's Race Transmissions



Media Credit

Steve Kelly, Luke Redman, Drag Videos Australia
Previous article Cal's Garage Fox Body
Next article William's JZA80 Supra

Leave a comment

* Required fields